24-Port 10/100/1000 Gigabit Switch with Webview and PoE

Click Detail to configure Path Cost, Priority, Administrative Edge Port (Fast Forwarding), and Administrative Link

Type. Use the text fields provided to edit the values, then click Apply.

Designated Cost. The cost for a packet to travel from this port to the root in the current Spanning Tree configuration. The slower the media, the higher the cost.

Designated Port. The port priority and number of the port on the designated port.

Designated Bridge. The bridge priority and MAC address of the device through which this port must communicate to reach the root of the Spanning Tree.

Path Cost. This parameter is used by the STP to determine the best path between devices. Therefore, lower values should be assigned to ports attached to faster media, and higher values assigned to ports with slower media. (Path cost takes precedence over port priority.) Note that when the Path Cost Method is set to “short,” the maximum path cost is 65,535.

Range –Ethernet: 200,000-20,000,000

Fast Ethernet: 20,000-2,000,000

Gigabit Ethernet: 2,000-200,000

Default –Ethernet – Half duplex: 2,000,000; full duplex: 1,000,000; LAG: 500,000

Fast Ethernet – Half duplex: 200,000; full duplex: 100,000; LAG: 50,000

Gigabit Ethernet – Full duplex: 10,000; LAG: 5,000

Priority. Defines the priority used for this port in the Spanning Tree Protocol. If the path cost for all ports on a switch are the same, the port with the highest priority (i.e., lowest value) will be configured as an active link in the Spanning Tree. This makes a port with higher priority less likely to be blocked if the Spanning Tree Protocol is detecting network loops. Where more than one port is assigned the highest priority, the port with lowest numeric identifier will be enabled.

Default: 128

Range: 0-240, in steps of 16

Administrative Edge Port (Fast Forwarding). You can enable this option if an interface is attached to a LAN segment that is at the end of a bridged LAN or to an end node. Since end nodes cannot cause forwarding loops, they can pass directly through to the spanning tree forwarding state. Specifying Edge Ports provides quicker convergence for devices such as workstations or servers, retains the current forwarding database to reduce the amount of frame flooding required to rebuild address tables during reconfiguration events, does not cause the spanning tree to initiate reconfiguration when the interface changes state, and also overcomes other STA-related

Chapter 5: Using the Web-based Utility for Configuration

64

Spanning Tree Tab - STP Port Settings

Page 73
Image 73
Linksys SRW2024P manual Port 10/100/1000 Gigabit Switch with Webview and PoE

SRW2024P specifications

The Linksys SRW2024P is a robust and versatile managed switch designed to meet the networking needs of small to medium-sized businesses. This switch features 24 Ethernet ports, making it suitable for connecting multiple devices while delivering exceptional performance and reliability. One of the standout features of the SRW2024P is its Power over Ethernet (PoE) capability, allowing users to power devices like IP cameras, VoIP phones, and wireless access points directly from the switch, eliminating the need for additional power sources and simplifying installations.

The SRW2024P supports a range of advanced technologies, including VLANs (Virtual Local Area Networks), which enable network segmentation and improved security by isolating different network segments. This segmentation can help enhance performance and control broadcast domains effectively. Additionally, the switch supports Quality of Service (QoS), allowing users to prioritize network traffic, ensuring that critical applications receive the necessary bandwidth for optimal performance. This feature is particularly beneficial in environments with high-definition video streaming or VoIP communications.

Another critical aspect of the Linksys SRW2024P is its support for robust network security protocols. With features like 802.1X port-based authentication, network administrators can enforce strict access control policies, ensuring that only authorized devices can connect to the network. The switch also provides basic security features such as MAC address filtering and access control lists (ACLs), enhancing the overall security of the network.

The easy-to-use web-based management interface makes it simple for administrators to configure and monitor the switch. It provides real-time information about network performance, port status, and traffic statistics, allowing for effective troubleshooting and management. The SRW2024P also includes the capability for SNMP (Simple Network Management Protocol), enabling integration with third-party network management solutions for more advanced monitoring and control.

In terms of physical characteristics, the Linksys SRW2024P is designed for reliable performance in various environments, with a compact rack-mountable chassis. This design allows for easy installation in standard 19-inch racks, making it a practical choice for businesses looking to optimize their network infrastructure.

In summary, the Linksys SRW2024P managed switch combines advanced networking features, ease of management, and PoE capabilities, making it an ideal choice for growing businesses looking to enhance their connectivity and network performance. With its reliable security measures, VLAN support, and QoS capabilities, the SRW2024P provides a solid foundation for a robust and scalable network.