
Wireless-G Game Adapter
The Setup Tab
The Basic Setup screen is the first screen you see when you access the Utility.
Firmware - This shows the version number and date of the firmware that is currently installed.
MAC - The MAC address of the Game Adapter is displayed here.
Network Type - Select the type of network you are using,
SSID - Enter the SSID or name of your wireless network. The SSID must be identical for all devices in the wireless network. It is
Network Type - Select the mode of your wireless network, Infrastructure or
If you have selected
Security - If you do not want to use wireless security, keep the default setting, Disabled. If you want to use WEP encryption, select Enabled and click the Edit Wireless Security button. For instructions on how to configure the security settings, refer to the following section about the WEP Encryption screen.
Status - This indicates the status of the Game Adapter’s connection to your wireless network.
A list of wireless networks is displayed at the bottom of the screen. Their SSIDs, MAC addresses, Channel settings, Signal Strength ratings, and Modes are shown.
SSID - This is the name of the wireless network.
MAC Address - This is the MAC address of the network’s access point.
Channel - The Channel setting of the wireless network is shown here.
Signal Strength (%) - Displayed here is the percentage of wireless signal strength available.
Mode - Shown here are the wireless standard and mode used by the network. A lock is displayed if the network has its wireless security enabled.
Chapter 7: Using the
Figure 7-2: Utility’s Setup Screen
30
The Setup Tab