Chapter 3: Connecting the
Overview
This chapter will explain how to connect the Media Link to your wired computer or network for setup.
If you want to set up the Media Link using its front panel LCD screen (without using your computer), then proceed to “Chapter 5: Connecting the
Connection to a Wired Network for Setup
1.Connect the included Ethernet network cable to an Ethernet (LAN) port on your PC, router, or switch.
2.Connect the other end of the cable to the Ethernet port on the Media Link’s back panel.
3.If you have connected the Media Link to your PC, then move the Media Link’s crossover
| If you have connected the Media LInk to your router or switch, then move the crossover |
|
| Parallel (II) position. | Figure |
4. | Plug the power adapter into the Media Link’s Power port, and plug the other end into an electrical outlet. |
|
5. | The Media Link will automatically power on, and the green LED adjacent to the Ethernet port will light up. |
|
Figure
Chapter 3: Connecting the | 8 |
Overview