DHCP
To change the Media Link’s DHCP setting, select DHCP. If the Media Link will be assigned an IP address automatically by a router or other DHCP server, then select Enable. You will not see the IP Address, Subnet Mask, Gateway, and DNS Server menus because these settings will be set automatically. If the Media Link needs a static IP address, then select Disable. You will need to configure the IP Address, Subnet Mask, Gateway, and at least one of the DNS Server settings.
Your selection will be denoted by a bracketed asterisk, [*]. Press the right arrow button to save your new setting. Press the left arrow button to cancel your change.
IP Address
To change the Media Link’s static IP address, select IP Address. Use the arrow keys to scroll through the numbers
Subnet Mask
To change the Media Link’s subnet mask, select Subnet Mask. Use the arrow keys to scroll through the numbers
Gateway
To change the Media Link’s gateway, select Gateway. Use the arrow keys to scroll through the numbers
DNS Server 1 and DNS Server 2
To change the Media Link’s DNS server address, select DNS Server 1 and/or DNS Server 2. (You must enter at least one DNS server address.) Use the arrow keys to scroll through the numbers
For information about the other LCD menus, refer to “Chapter 6: Using the LCD Menus of the
After you have finished configuring the Media Link’s network settings, proceed to the next section,
“Installing the Media Server Software.”
Chapter 5: Connecting the
Figure
Figure
Static IP address: a fixed address assigned to a computer or device connected to a network.
25
Using the LCD Menus to Set up the Media Link