Instant Wireless® Series
3.The Network Settings screen will appear.
If your network has a DHCP server, click the radio button next to Obtain an IP address automatically (DHCP). Click the Next button to continue, and go to Step 4.
If your network does not have a DHCP server, click the radio button next to Specify IP Settings. Enter an IP Address, Subnet Mask, Default Gateway, and DNS appropriate for your network. You must specify the IP Address and Subnet Mask on this screen. If you are unsure about the Default Gateway and DNS addresses, then leave these fields alone.
Click the Next button to continue, and go to Step 4.
Figure
IP Address - This IP Address must be unique to your network.
Subnet Mask - The Adapter’s Subnet Mask must be the same as your wired network’s Subnet Mask.
Default Gateway - Enter the IP address of your network’s Gateway. DNS - Enter the DNS server addresses used by your ISP.
4.The Network Mode screen shows a choice of two network modes. Click the Infrastructure Mode radio button if you want your wireless computers to communicate with computers on your wired network via an access point. Click the
Figure
Infrastructure Mode - This mode allows wireless and wired networks to communicate through an access point.
SSID - The SSID is the unique name shared by all devices in a wireless network. The SSID must be identical for all devices in the wireless network. It is
24 | 25 |