Panasonic DMR-EH68, DMR-EH58 Connecting a television and VCR, Additional connections, Connection

Connecting a television and VCR

			To household mains socket
		Television’s rear panel	[For]Australia]and]N.Z.]
			(AC 220 to 240 V, 50 Hz)
To the aerial		AUDIO IN VIDEO IN	[For]Asia]and]Middle]East]
	VHF/UHF		(AC 220 to 240 V, 50/60 Hz)
	RF IN	R L

				Red White Yellow	[For\Saudi\Arabia[ BE SURE TO
					READ THE
					CAUTION FOR
					THE AC MAINS
					LEAD ON PAGE
					2 BEFORE
1		Other connections		5	CONNECTION.		6
		(➡ 9, 63)
					AC mains lead
					(included)
					Connect only after all other
					connections are complete.
					[For]Middle]East]
					Use the AC mains lead that matches
			Audio/Video cable		the socket for the area you live in.
					[For]Asia]
			(included)		AC mains lead with a label is for
Aerial cable					Thailand.
					AC mains lead without a label is for
					areas other than Thailand.
RF		Y		Red White Yellow
IN
		PB	AV1	OUT
			(TV)
RF	OPTICAL	PR		IN			AC IN
OUT				4
	DIGITAL AUDIO OUT COMPONENT			AV
				Red White Yellow	AV OUT
	(PCM/BITSTREAM)	VIDEO OUT	AV2(EXT)
					Cooling fan	This unit’s rear panel
		RF coaxial cable
2	4			3	Connect the unit directly to the television		DO NOT
					If you connect the unit through an AV
					selector or video cassette recorder to the		Television
			Audio/Video cable		television, video signal will be affected by
					copyright protection systems and the picture
					may not be shown correctly.
RF coaxial cable							VCR
(included)
				Red White Yellow			This unit

VHF/UHF RF OUT	R L	≥When connecting to a television with a built-in VCR
RF IN	AUDIO OUT VIDEO OUT	Connect to the input terminals on the television side if there
		are both television and VCR input terminals.

VCR’s rear panel

Connecting to a television with 21-pin Scart terminal

You can also connect with the AV1 terminal on this unit using the 21-pin Scart cable.

If your television is equipped with RGB input capability, by connecting with a fully wired 21-pin Scart cable you can see video using RGB output on this unit.

[Required]setting]

“AV1 Output” in the Setup menu (➡ 60)

Connecting to a VCR with 21-pin Scart terminal

You can also connect with the AV2 terminal on this unit using the 21-pin Scart cable.

[Required]setting]

“AV2 Input” in the Setup menu (➡ 60)

Additional connections

RQT9075

65