Check, change or delete a programme
≥Even when the unit is turned off, you can display the timer recording list by pressing [PROG/CHECK].
Press [PROG/CHECK].
Icons
FTimer recording standby is activated. [ This programme is currently recording.
The times overlap those in another programme. Recording of the programme with the later start time starts when the earlier programme finishes recording.
l | You stopped a weekly or daily timer recording. The icon | |
disappears the next time the timer programme starts | ||
| ||
| recording. | |
| The disc was full so the programme failed to record. |
The programme was
XThe programme did not complete recording because the disc is dirty or some other reason.
Timer programmes set to Auto Renewal Recording (➡ right).
Titles that have been rerouted to the HDD (Displayed while recording.)
HDD Recording drive is set to HDD DVD Recording drive is set to DVD
| Timer | Remain | HDD | 30:24 SP | DVD | 1:58 SP | |
| Recording |
|
| TUE 14.10.08. 12:53:00 | |||
| No. Name | Date | Start | HDD | Mode | Drive |
|
| Stop DVD | space |
| ||||
New Timer Programme
Press OK to store new programme.
OK
RETURN
Message displayed in the “Drive space” line
OK: Displayed if the recording can fit in the remaining space.
>(Date): For recordings made daily or weekly, the display will show until when recordings can be made (up to a maximum of one month from the present time) based on the time remaining on the disc.
!: It may not be possible to record because: ≥there is not enough space left
≥the number of possible titles has reached its maximum.
Relief: Timer programmes that will be relief recorded to the HDD.
Relief Recording
When the recording drive is “DVD” and there is not enough remaining space, recording automatically switches to the “HDD”. If there is no disc in the tray or the disc cannot be recorded on or when timer recording starts while copying, the recording drive will be altered to the HDD.
≥The Direct Navigator shows which programmes were relief-
recorded (“
” is displayed.) (➡ 27).
≥If the time remaining on the HDD is insufficient, as much of the programme as possible will be recorded onto the HDD.
Auto Renewal Recording
[HDD]
If you record a programme onto HDD repeatedly everyday or every week using timer recording, the unit will record the new programme over the old one.
This function can be used only when weekly recording or daily recording is selected.
1 Press [PROG/CHECK].
2 Press [3, 4] to select the programme and press [OK].
3 Press [2, 1] to select “RENEW” column.
4 Press [3, 4] to select “ON” and press [OK].
Timer | Remain | HDD | 30:24 SP | DVD | 1:58 SP | ||
Recording |
|
|
|
| TUE 14.10.08. 12:53:00 | ||
Name | Date | Start | Stop |
| HDD | Mode | RENEW |
| DVD | ||||||
1 ARD | SUN | 22:00 | 22:30 | HDD | SP | ON | |
|
|
|
|
|
| Programme Name | |
[Note]
≥If a programme set for Auto Renewal Recording is protected or while play back is taking place from the HDD, or while copying, the programme will not be overwritten. Instead the programme set for recording will be saved as a separate programme, and this programme will be the one to be overwritten when the next Auto
Renewal Recording takes place.
≥Playlists made from programmes that were set for Auto Renewal
Recording are deleted along with auto renewal.
≥When there is not enough space on the HDD, the programme may not be recorded completely.
Advanced timer recording
∫To change a programme
Press [3, 4] to select the programme and press [OK]. (➡ 24, step 3)
∫To delete a programme
Press [3, 4] to select the programme and press [DELETE ¢].
You can also delete a programme with the following steps
1Press [3, 4] to select the programme and press [OPTION].
2Press [3, 4] to select “Delete” and press [OK].
∫To exit the timer recording list
Press [PROG/CHECK].
Programmes that failed to record are deleted from the timer recording list at 4 a.m. two days later.
RQT9075
25
