Linksys WMP55AG Installation and Configuration for Windows 98, Me, and, Instant Wireless Series

Instant Wireless® Series

Chapter 5: Installation and Configuration for Windows 98, Me, and 2000

Important for Windows XP users: Go to “Chapter 4: Installation and Configuration for Windows XP.”

Overview

The Dual-Band Wireless A+G PCI Adapter Setup Wizard will guide you through the installation and configuration procedure for Windows 98, Me, and 2000. Then you will install the Adapter in your computer.

Software Installation for Windows 98, Me, and 2000

1.Insert the Setup Wizard CD-ROMinto your CD-ROM drive. The Setup Wizard should run automatically, and Figure 5-1 should appear. If it does not, click the Start button and choose Run. In the field that appears, enter D:\setup.exe (where “D” is the letter of your CD-ROM drive).

Figure 5-1

•Install - Click the Install button to begin the software installation process.

•User Guide - Click the User Guide button to open the PDF file of this User Guide.

•Exit - Click the Exit button to exit the Setup Wizard.

Dual-Band Wireless A+G PCI Adapter

2.To install the Adapter, click the Install button on the Welcome screen.

3.After reading the Warranty Policy, shown in Figure 5-2, click the Next but- ton if you agree, or click the Cancel button to end the installation.

Figure 5-2

4.Next you will choose your type of wireless network. If you will connect to both 802.11a and 54g networks, select 5GHz + 2.4GHz. If you will connect to only 802.11a, select 5GHz. If you will connect to only 54g, select 2.4GHz. Click the Next button to continue.

Figure 5-3

10 11