PaperJet 55 user guide – Edition 3 – 10.10.01

Connecting to a switchboard

You can store the access code required to get an outside line so that you only have to press the EXTERNAL button.

With some switchboards you may also need to switch your PaperJet 55 from TONE dialling to PULSE dialling. Check with your switchboard manager or supplier to see if this is necessary.

To set the dialling mode and access number





Volume

Start

0-9

Start

Press the < > buttons to display the options: FLASH or PREFIX. If your access code is recall choose FLASH. If your access code is a digit(s) choose PREFIX.

Press Start to confirm your choice.

If you select PREFIX you are asked for the code needed to get an outside line via your switchboard (max. three digits).

Enter your code.

To confirm.

Display shows PSTN DIAL: TONE

Function

F

Start

Start



Volume

Start





Volume

Start

While your PaperJet 55 is in standby mode

Press the Function button until the display shows INSTALLATION

Display shows TEL.LINE SET-UP Display shows PUBL. LINE (PSTN) Press until the display shows PRIV. LINE

(PBX)

Display shows PBX DIAL: TONE

Press to switch between TONE and PULSE. Press to confirm. Display shows

EXT. LINE: PREFIX





Volume

Start

Stop

Press to switch between TONE and PULSE settings to suit your switchboard.

To confirm.

To return to standby.

37

Page 39
Image 39
BT 55 manual Connecting to a switchboard, To set the dialling mode and access number, Display shows Pstn Dial Tone, Pbx