Chapter 3
Advanced Configuration
WPA Personal
Wireless > Security > WPA Personal > TKIP
WPA Encryption Algorithm TKIP is the default algorithm. AES is also available.
WPA Shared Key Enter your Shared Key, which must have
Click the Save button to apply your changes, or click the Cancel button to cancel your changes.
WEP
Wireless > Security > WEP
Default Transmit Key Select the Default Transmit Key used by your wireless network. This indicates which WEP key your network uses for WEP encryption.
Passphrase Enter a Passphrase and click the Generate Keys button to automatically generate WEP Keys
Key 1 to Key 4 To enter WEP keys manually, leave the Passphrase field blank and enter your WEP keys. For 64‑bit WEP encryption, each key must have 10 hexadecimal characters, while for
Authentication Select your wireless network’s authentication type. The default is Open System, for which the sender and the recipient do NOT use a WEP key for authentication. Select Shared Key if you want the sender and recipient to use a WEP key for authentication.
Click the Save button to apply your changes, or click the Cancel button to cancel your changes.
The Printer Tab > Scan
By default, the computer that sent the print job will be disconnected one minute after the print job is completed. Use this screen to change the length of time the computer is connected to the printer.
Click the Save button to apply your changes, or click the Cancel button to cancel your changes.
Auto Disconnect
Printer > Scan - Auto Disconnect
1 min after job completed To change the number of minutes before the computer is disconnected from the printer, enter the new number
Always connect If you want the computer to always be connected to the printer, select this option.
Click the Save button to apply your changes, or click the Cancel button to cancel your changes.
9 |
