Linksys manual WRT54G3G Setup for 3G/UMTS or GPRS Network Only, A B C D E F G H

2

WRT54G3G Setup for 3G/UMTS or GPRS Network Only

A

B

C

D E

F

G

H

Before you begin, make sure that you have your Vodafone Mobile Connect Card Services information, which was supplied with your Mobile Connect Card package at the time of purchase. If you do not have this information, call Vodafone Customer Services. The contact information is in the Vodafone Mobile Connect Card package.

Make sure that the 3G/UMTS Router is powered off.

Insert your Vodafone SIM Card into your Vodafone Mobile Connect 3G/UMTS Card, following your card’s instructions.

Insert your Vodafone Mobile Connect 3G/UMTS Card.

Plug the other end of the network cable into one of the Router’s yellow ports numbered 1 to 4.

Connect the power adapter to the Router's Power port and the other end to an electrical outlet.

Make sure the Power, Internet and 3G/UMTS LEDs on the front panel light up green.

The Power LED will flash green for a few seconds when the Router goes through its self-diagnostics test. This LED will stay solidly lit when the self-test is complete. If it does not stop flashing, refer to “Appendix A: Troubleshooting” of the User Guide on the Setup CD.

Proceed to step 5.

D

E

F

3