Wireless-G Broadband Router with 2 Phone Ports

POP3 (Post Office Protocol 3). A standard mail server commonly used on the Internet. It provides a message store that holds incoming e-mail until users log on and download it. POP3 is a simple system with little selectivity. All pending messages and attachments are downloaded at the same time. POP3 uses the SMTP messaging protocol.

Specific Port#. You can add three additional applications by entering their respective port numbers in the

Specific Port# fields.

Port-based QoS

Port-based QoS allows you to prioritize performance for three of the Router’s ports, LAN Ports 1-3. Port-based QoS does not require support from your ISP because the prioritized ports are LAN ports going out to your network.

Enable/Disable. To use port-based QoS, select Enable. Otherwise, keep the default, Disable.

For each port, specify the Priority, Flow Control setting, and Ingress Rate Limit.

Priority. Select the port’s priority level, High or Low.

Flow Control. If you want the Router to control the transmission of data between network devices, select

Enable. To disable this feature, select Disable.

Ingress Rate Limit. This setting limits the incoming bandwidth. To use this feature, select 8M, 4M, 2M, 1M, 512K, 256K, or 128K (M stands for Mbps, while K stands for kbps). If you do not want to use this feature, keep the default, Disable.

Chapter 5: Configuring the Router

43

The Applications & Gaming Tab - QoS

Page 51
Image 51
Linksys WRT54GP2 manual Port-based QoS, Specific Port# fields