General use of the handset
Put the System Controller into or bring it out of standby
mode like this
Press the STANDBY key.
Put a source into or bring it out of standby mode like this
Press the appropriate Audio/Video source select key, followed by the STANDBY key within 2 seconds.
For example to put your TV into standby mode, press the TV key followed by the STANDBY key.
Change the volume like this
The following volume and speaker balance keys can operate either the System Controller volume functions or the TV volume functions:
NORM, SELECT,
To change from the System Controller to TV control, or vice versa:
Press the Audio/Video source select key corresponding to the source you want to listen to, followed by one of the above volume and speaker balance keys within 2 seconds.
For example, if the Personal Handset is currently controlling the TV volume functions and you want to increase the volume on the System Controller for the CD you are listening to:
Press the CD key, followed by the VOLUME + key within 2 seconds.
The speaker and balance keys will now control the System Controller volume functions.
Select amplifier controls like this
The AV System function keys, Audio/Video source select keys, volume and speaker balance keys, STANDBY key, and KNEKT key can operate either the AV 5103 System Controller or another amplifier, if the Personal Handset has learnt its commands; see Programming the AV Personal Handset, page 19.To change from operating the AV 5103 to operating a learnt amplifier:
Press the Audio/Video source select key for the learnt amplifier.
For example, if AUX2 was used to learn the amplifier’s commands, press AUX2 to select the learnt amplifier’s commands.
To change from operating a learnt amplifier to operating the AV 5103:
Press the LEARN key.
The LEARN key will be illuminated.
Press the MODE key.
The LEARN indicator will blink once.
Press the numeric key
The LEARN indicator will blink once, and then switch off when you have released the numeric key.
For example, to select the AV 5103 System Controller’s commands if it is configured as Amplifier 1 (see the Linn AV System Controller User’s Guide):
Press the LEARN key.
Press the MODE key followed by numeric key 1.
u s i n g t h e P e r s o n a l H a n d s e t
11