p r o g r a m m i n g t h e A V P e r s o n a l H a n d s e t
In addition to providing all the functions necessary to control the AV 5103 System Controller and any other Linn equipment in your system, the Personal Handset can learn commands from the
The Personal Handset provides two programmable groups of keys: the Programmable source control keys and the Programmable numeric keys, as well as the STANDBY key. An independent set of functions can be assigned to these keys for each of your audio and video sources, thus allowing you to control up to 11 different sources attached to your system.
In addition there is also a special case for a TV source, which can be learnt by the Personal Handset’s volume and balance keys.
When you select an audio or video source the functions of the programmable keys automatically change to the functions you have learnt for that source.
The following procedure allows the AV5101 Personal Handset to be programmed to control other equipment such as VCRs and LaserDisc players.
Erasing previously lear nt commands
Prior to learning a new set of commands from another
Press the LEARN key.
The LEARN indicator will illuminate.
Press and hold the Audio/Video source select key for the source you want to erase, and while still holding the Audio/Video source select key, press and hold the LEARN key.
When the Audio/Video source select key is pressed, the LEARN indicator blinks once. After the Audio/Video source select key and the LEARN key have been held for 5 seconds, the memory for the selected source will be erased and the LEARN indicator turns off.
For example to erase previously learnt VCR commands, after pressing the LEARN key, press and hold the VCR key, and while holding the VCR key, press and hold the LEARN key for 5 seconds.
p r o g r a m m i n g t h e A V P e r s o n a l H a n d s e t
19
