6 Change the volume offset for the source

Volume offset is for adjusting the volume of a source in comparison to other sources.You may want to
adjust the volume offset for a source if, for example,your tuner sounds quieter than your CD player when
played at the same volume setting.
Press SOURCE – or BAL L again.
The display shows the volume offset for the source.
To increase / decrease the volume offset for this source:
Repeatedly press or hold VOLUME +/VO LUM E - .
Volume offset range is from –10 (lowest setting) to 10 (highest setting),
in 40 x 0.5 steps,with no volume offset being 0.

7 Change the balance offset for the source

Balance offset is for adjusting the balance of a source in comparison to other sources.You may want to
adjust the balance offset for a source if, for example,your tuner sounds louder through the left channel than
it does through the right.
Press SOURCE – or BAL L again.
The display shows the balance offset for the currently selected source.
To shift the balance offset to the right:
Repeatedly press VOLUME +.
To shift the balance offset to the left:
Repeatedly press VOLUME –.
Balance offset range is from 5 increments to the left,to 5 increments to the right.

10

Source Setup