Linn Klimax Kontrol Preamplifier 8 Change the unity gain for the source, 9 Exit source setup mode, 11

8 Change the unity gain for the source

The unity gain setting lets you use the KLIMAX KONTROL in a multi-channel AV system.

If you are setting up an AV processor as one of your sources and the front speakers are going to be

channelled through the KLIMAX KONTROL,set unity gain to Yes.In all other cases,set to No. If unity gain is

set to Yes for a source other than an AV processor,the volume level from your KLIMAX KONTROL will be very

high,non-adjustable and could damage your loudspeakers.

Press SOURCE – or BAL L again.

The display shows whether unity gain for the currently selected source

is on (Yes) or off (No).

To change the unity gain setting:

■Press VOLUME +.

To save your adjustments and exit source setup mode:

■Press STANDBY.

Note:

If you wish to reset the KLIMAX KONTROL to the original settings

configured by the installer,enter user options mode and selec t YES

for the INSTALLER SETUP option (see User Options, page 15).

Source Setup