UK users please read this important safety information
Replacing the fuse in the mains plug
This appliance is fitted with a non-rewireable 13 Amp mains plug.The plug contains a 5 Amp fuse.If the fuse has blown
it can be replaced as follows:
a) Pull out the red fuse cover/carrier.
b) Remove and dispose of the blown fuse.
c) Fit a new 5 Amp BS1362 approved fuse into the carrier and push the carrier back into the plug.
Always ensure the fuse cover is fitted.If the fuse cover is missing do not use the plug.Contact your Linn retailer to
obtain a replacement fuse cover.Fuses are for fire protection and do not protect against electric shock.
Mains plug replacement
Should your mains plug need replacing and you are competent to do this proceed as follows.If you are in doubt contact
your Linn retailer or a competent electrician.
a) Disconnect the plug from the mains supply.
b) Cut off the plug and dispose of it safely. A plug with bared conductors is dangerous if engaged in a live socket.
c) Only fit a 13 Amp BS1363A approved plug with a 5 Amp fuse.
d) The cable wire colours or a letter will be marked at the connection points of most quality plugs.
Attach the wires securely to their respective points.The Brown wire must go to the Live pin,the Blue wire must
go to the Neutral pin,and the Green/Yellow wire must go to the Earth pin.
e) Before replacing the plug top ensure that the cable restraint is holding the outer sheath of the cable firmly and
that the wires are correctly connected.
WARNING
THIS APPLIANCE MUST BE EARTHED.
22
Impor tant Safety Information