Alarm function
The KNEKT RCU contains a very flexible alarm function, which can activate a macro (see Macros above) at a specific time, or series of times of your choosing. This function will therefore switch on the KNEKT RCU as specified and play a selected source. So, for example it could be used to wake you up in the morning to the sound of your favourite radio station or your favourite CD track.
To set an alarm:
●Access macro mode, by pressing the WHERE and ON/OFF keys together.
●Press WHAT to select the number of the macro you have recorded that you wish to use for the alarm.
●Press DO until the display shows ‘Key’.
●Press 
.
After a short delay the display will show ‘Alarm1’.
●If you are already using Alarm1, or wish to select another Alarm number, press WHAT to choose an alternative.
●Press DO to show the type of alarm; you have the following choices:
Daily: | The macro will be played every day, at the same time |
|
|
Wkday: | The macro will be played only on selected weekdays. Numbers |
| correspond with Sunday to Saturday respectively. Large numbers |
| mean that alarm is inactive that day. Small numbers mean alarm |
| is active |
|
|
Dated: | The macro will be played only on a specific date. |
|
|
KNEKT RCU advanced functions English
●Press the
●Press DO to move to the next number.
●Once you have finished setting the alarm, press 
to store your setting.
To modify an alarm:
●To modify an alarm, (for example, to change the time), proceed as for To set an alarm above, and select the number of the macro and the number of the alarm you have already defined.
●Step through the fields you have defined using DO until you get to the one you wish to change.
●Use the
●Press 
to store the modified alarm.
To cancel an alarm:
●Detach the macro associated with the alarm from the 
key (see To detach a macro from a key).
●Press the 
or 
symbol to step through the different types of alarm and press DO to select.
KNEKT
11 | Owner's Manual |
