English KNEKT RCU advanced functions
To replay a macro:
●To access macro mode, following the instructions above (To access macro mode).
●Press WHAT to select the number of the macro you want to replay.
●Press DO until the display shows ‘Replay’.
●Press the
To attach a macro to a key:
You can attach a macro to any of the following keys:
You can then run the macro simply by selecting macro mode and pressing the appropriate key.
●Access macro mode, following instructions (To access macro mode) above.
To detach a macro from a key:
●Follow the instructions above - To attach a macro to a key, except in the
second last step, press the
●Press DO once the correct key is selected.
To replay a macro attached to a key:
●If the macro is attached to
●If the macro is attached to ON/OFF you can replay it simply by pressing ON/OFF.
For information about macros attached to , see Alarm function below.
●Press WHAT to select the number of the macro you want to attach.
●Press DO until the display shows ‘Key’.
If the macro is already attached to a key, the display will show the name of the key the macro is attached to.
●To attach a macro to a key, keep pressing the
key, under the ‘>’ symbol to step through the available options:
●Press DO when the correct key is selected.
To erase a macro:
●Access macro mode, and then press WHAT to select the number of the macro you wish to erase.
●Repeatedly press DO until the display shows ‘Erase’.
●Press the
KNEKT
Owner's Manual | 10 |