![VOL ▼▼VOL](/images/new-backgrounds/18456/1845633x1.webp)
The display will show the input you have selected and the LISTEN indicator will light. There is a short delay as you step through inputs while the volume fades down and then up again between inputs. While the volume is fading, the LISTEN indicator dims. The lower the volume control setting the shorter this delay will be.
VOL ▼▼VOL
TO CHANGE THE VOLUME press and hold the
▼
VOL or VOL▼Keys until
the desired volume level is reached. The VOLUME indicator will light, and the volume will be displayed as a number from 0 to 60. Above step 4, each volume step is 1 dB.
MUTE
TO MUTE the WAKONDA press the MUTE key. The music will fade out and the MUTE indicator will light.
TO UNMUTE the WAKONDA press the MUTE key again. The previous volume setting will be displayed, the music will fade up and the MUTE
indicator will go out. Pressing either of the | ▼VOL or VOL ▼ keys will | ||
also unmute the WAKONDA. |
|
| |
|
|
|
|
| LISTEN |
|
|
TO DISPLAY THE CURRENT INPUT when the display is asleep or is showing the volume, press the LISTEN key once. The LISTEN indicator will light and the current input will be displayed. Pressing
▼INPUT or INPUT
displayed.
▼
will also display the current input, if it is not already
RECORD
TO SELECT AN INPUT TO RECORD press the RECORD key. If the
LISTEN indicator lights, press RECORD again. The RECORD indicator will light, and the display will show the input currently selected for recording. Select the input you want to record by using the ▼INPUT or INPUT ▼ keys. The selected input is now fed out of both tape outputs. You can listen to one source while you record another.
▼INPUT and INPUT
recording until you
▼
will continue to control the input you are
11