Linn WAKONDA Listen, Record, OUT sockets, simultaneously, Mono, marked MONO, INPUT or INPUT

	To get out of BALANCE mode press ▲BAL and BAL▲at
	the same time, and the WAKONDA will revert to
	VOLUME mode. Or to get to LISTEN mode, press LISTEN,
	▲INPUT or INPUT▲
LISTEN	When this indicator is lit, the WAKONDA is in LISTEN
	control mode, and pressing ▲INPUT or INPUT▲ will
	change the input that you are listening to. If you press
	RECORD while already in LISTEN control mode the
	WAKONDA will enter RECORD control mode.
RECORD	When this indicator is lit, the WAKONDA is in RECORD
	control mode and ▲INPUT or INPUT ▲ will display and
	control the input that is being sent out of the TAPE-
	OUT sockets.
	If the RECORD light is flashing, this means the WAKONDA
	is in RECORD-LOCK mode and will not respond to
	remote control commands from other rooms. To cancel
	RECORD-LOCK mode, press INPUT ▲ and RECORD
	simultaneously.
MONO	When this indicator is lit the WAKONDA is operating in
	MONO. To get back to stereo, press the pair of keys
	marked MONO

---- When no keys have been pressed for around 30 seconds, the WAKONDA will go to standby and the display will show two dashes. To awake up the WAKONDA the best thing to do is press either ▲VOL or

LISTEN and then check the display to see what state the WAKONDA is in.

15