OPERATION We designed the WAKONDA to be as simple as possible to operate. It has a clear display, a simple front panel and full remote control.
The control area looks like this:
Although there are many sophisticated features, all commonly used functions require only one key press. To access the less commonly used functions, such as balance, two keys must be pressed at the same time. The status of the WAKONDA is always indicated through the row of indicator lights.
If you find that your WAKONDA does not respond to the controls as you expect, please refer to the GETTING UNSTUCK section on page 15.
POWER
TO TURN THE WAKONDA ON press the POWER button. A green light will appear next to it. In about three seconds, the LISTEN indicator will light, and the display will show “Cd”. (When distributed audio input is fitted the display will show “dA”). The WAKONDA selects the input shown and volume 30.
TO TURN THE WAKONDA OFF press the POWER button again.
If you get lost in some of the advanced features while learning to use your WAKONDA, just turn the POWER off and back on. We recommend you turn the WAKONDA off when it is not in use.
9
