Initial installation
Remote control
Batteries
To insert or change the batteries, press the point marked by an embossed arrow. Push the cover of the battery compartment down and remove it. In- sert the batteries of the alkaline manganese type LR 03 (AAA) with the correct polarity
+
+
Then push the cover back on.
Note on disposal of batteries:
The original batteries do not contain any pollutants such as cadmium, lead and mercury. Used batteries do not belong in the domestic waste. They must be taken to the appropriate col- lection points according to the national laws.
Setting the remote control to operate the TV set
TV Press the TV button
How to operate other Loewe equipment is de- scribed on page 20.
Connection
Mains
Connect the TV set to a
Antennas
Connect your antenna or cable system to the VHF/ UHF antenna socket.
If equipped with a PIP tuner, plug the antenna plug which comes out above the PIP antenna socket into the antenna socket of the VHF/UHF tuner. Plug the antenna plug of your antenna or cable system into the PIP tuner socket.
If equipped with a
2
If equipped with the terrestrial digital tuner 2
If equipped with one or two satellite tuners, con- nect the Sat antennae to the SAT sockets (see fig. page 5).
Switching on
Press the On/Off button so that it snaps in.
Initial installation
Automatic programming of the TV set is started the first time you switch it on. Follow the menus. First you have to select the menu language for your set. Then you specify which antenna you have connected to your TV and in what country you are using it. Then you start the station search. The TV set searches for, stores and sorts all the stations which your antenna system re- ceives. You then see a list of the stored stations in which you can mark your favorites. Finally log in your video recorders, decoders, Loewe audio system and Home Automation with the con- nection wizard and connect these to the TV set according to the illustrated connection plan.
Pressing the OK button in the
OK direction of the arrow to select the settings
... confirm the settings with OK.
OK You then move on to the next menu ...
... press this button if you want information about the settings.
You can repeat initial installation at any time, e.g. after moving house. Call the index in the main information (info button). Then select the
SAT
IN
SERVICE
item ”Repeat initial installation”. Then start
VHF/UHF
AV1 AV2/RGB
OUT |
| R |
AUDIO | OUT | |
VHF/UHF |
| L |
SUBWOOFER
STAND
”Initial installation” with OK.
9