| Loewe 3770 ZW, 3772 Z, 3781 ZW, 3970 ZW, 3972 ZP, 3981 ZW, C 32

Daily handling

Switching on/off

Your TV set is equipped with an eco-standby power supply unit. The power consumption drops

Changing channels

P+

Channels up/down (only favorite V— OK V+ stations if these are shown in the

About the station table
OK	Call the station table with OK

to low power in standby mode.

P–

station table).

Channel overview: TV	Numerical
AVS	7 S–RTL

If you want to save even more energy, switch the set off with the On/Off switch. However, please note that EPG data are then lost and timer recordings programmed on the TV set will not be carried out.

If the TV is switched on, you can switch it off with the blue On/Off button on the remote control. The red standby LED on the set lights up. If the green LED also lights, a timer recording is in progress, EPG data is being acquired or ra- dio mode without screen display is active.

From standby it is best to switch back on with the blue On/Off button or with a numeric key (station 0-9). The green operating LED then lights up.

	When you switch on the TV with
OK	OK, you see the station table and
	can choose a station.
RADIO	Switch on in the radio mode.
	None of the indicators lights up
	when you switch off the TV set
	with the On/Off button on the
	set.
	If the TV is switched off like this
	you can switch it back on with
	the On/Off button.

With the numeric keys on the remote control The set has a dynamic memory with 220/with DVB 1470 memory slots. If up to 9 stations are stored, you only need to enter one number, up to 99 two numbers, up to 999 three numbers and above 999 four numbers (please look in the station table to ﬁnd out how many stations have been stored).

					1-digit stations
					Keep the button 0 – 9 pressed
					for one second, the channel then
					changes immediately.
					or press the button 0 – 9 brieﬂy, the
			pqrs		channel then changes after 2 sec-
			pqrs		onds (changes immediately if only 9
		long			onds (changes immediately if only 9
		long			stations are stored).
					stations are stored).
					2-digit stations
					Keep the second numeric key
				pqrs	pressed for one second, the channel
		abc		pqrs	pressed for one second, the channel
	short long				then changes immediately.
	short long				or press both numeric keys brieﬂy,
					or press both numeric keys brieﬂy,
					the channel then changes after 2
					seconds (immediately when up to
					99 stations are stored).
					3-digit stations
					Keep the third numeric key pressed
		abc pqrs			Keep the third numeric key pressed
		abc pqrs			for one second, the channel then

short short long
short short long					changes immediately.
					changes immediately.
					or press the three numeric keys
					brieﬂy, the channel then changes
					after 2 seconds (immediately when
					up to 999 stations are stored).
					4-digit stations
					Press the four numeric keys brieﬂy,
		abc	pqrstuv		Press the four numeric keys brieﬂy,
					the channel then changes immedi-
	all short				the channel then changes immedi-
					ately.

Depending on how many stations have been stored, you can place one or more zeros in front of the number and select for example station 7 = 07 or 007 or 0007.

AV2

N–TV

AV1

DSF

0 VIDEO

TM3

1 ARD

PRO7

ZDF

RTL 2

SAT.1

WDR 3

RTL

BR 3

5 VOX

6 NDR

MDR 3

0 ... 9 Select program:

Select and

Change programs

INFO Info

OK press OK to proceed

Favourite programs

MENUMenu

Change sorting

END End

Mark station (if possible the

marked station is shown in the

PIP picture)✳

...

Mark with numeric keys

wxyz

Call the marked station

Sort alphabetically/numerically

(blue button)

Channel overview: TV

Alphabetical

ARD

EUROSPRT

BR-ALPHA

HOT

BR3

CNN INT.

KIKA

CAM