| Loewe 3770 ZW, 3772 Z, 3781 ZW, 3970 ZW, 3972 ZP, 3981ZW, C 32

Operating additional equipment

Video playback

There are several ways to see the picture and hear the sound of the VCR, DVD player or camcorder on your TV:

1. Use the Euro-AV sockets on the TV and VCR.

This is the best way to get a good picture

AV Call AV selection list

AV Selection VIDEO AV1 AV2 AVS

and sound quality. For camcorders and digital

cameras it is best to use the front sockets AVS.

If you are playing back from a VCR with Dig-

Select AV socket or VIDEO for VCR transmitter.

ital Link Plus, the VCR picture is shown on the

current station slot.

If you are playing back from a standard VCR,

DVD player, camcorder or digital camera,

select the AV socket to which the video signal

is connected in the AV selection list

(button 0 AV) or the station table.

Video recorders emit a switching voltage dur-

ing playback which the TV set can decode (can

be activated in the connection wizard or set

Settings – AV Settings – Allow switching volt-

age to ”Yes” in the TV menu). Then the VCR

picture is shown on the current station slot as

in Digital Link Plus VCR’s.

2. You can also control logged-in Loewe VCRs

and DVD players with the video menu bar. See

page 17 for more details.

3. Use the antenna connection between the VCR

and the TV. The sound is only transmitted in

mono. Select the ﬁrst menu item, e.g. VIDEO,

in the AV selection.

Now you will see the playback from the connected AV unit.

In the numeric sorting you will always ﬁnd the AV sockets at the top of the list without station numbers.

OK	Mark the AV socket
OK	Call the marked AV socket

Now you will see the playback from the connected AV unit.