Troubleshooting
Problem | Possible cause | Remedy |
|
|
|
All menus are displayed in the wrong language. | The menu language was set incorrectly. | Set the menu language: |
|
| Press the INFO button in TV mode (Index). |
|
| Mark the first key word and call it with OK. |
|
| Then select the language and confirm it with |
|
| OK. |
|
|
|
In the TV menu, Connections cannot be called | A timer recording is in progress. | Wait until the timer recording ends or delete |
(displayed in grey). |
| the timer recording (page 55). |
|
|
|
The control functions of the Loewe Recorder | a) The Digital Link function is not activated or | a) Activate Digital Link in the recorder (see |
and the Timer are not working or are not | not possible in the recorder. | operating instructions of the recorder). |
working properly | b) | b) Connect |
| ||
| c) Recorder is not logged in. | c) Register recorder (page 44). |
|
|
|
General problems when connecting external | a) The device is not logged in to the connection | a) In the connection wizard (TV menu |
devices via an AV input. | wizard or is connected differently than is shown | Connections New devices/modifications) |
| in the connection diagram. | compare the connection diagram with the |
|
| actual installation and connect as illustrated |
|
| (page 44). |
| b) The AV standard is set incorrectly. | b) Set the correct standard (page 17). |
| c) The signal type is set incorrectly. | c) Set the correct signal type (page 45). |
|
| If AV standard or AV signal is set to "Automatic" |
|
| then this can cause errors to be detected with |
|
| signals that do not comply with standards. |
|
| In this case standard and signal must be set |
|
| according to the information in the operating |
|
| manual of the external device. |
|
|
|
The connection of a decoder does not | a) The signal is not decoded because the correct | a) Follow the instructions in the connection |
function or does not function properly. | decoder stations have not been selected in the | wizard (TV menu Connections New |
| connection wizard. | devices/modifications) and select the |
|
| appropriate decoder transmitter (page 44). |
| b) In decoder mode the sound is missing because | b) Follow the instructions in the connection |
| the wrong decoder sound has been assigned | wizard and select the right audio source |
| in the connection wizard. | (Decoder, TV oder Autom.) (page 44), see |
|
| also decoder instructions. |
|
|
|
|
|
|
Downloaded From
- 66
