MULTI-LEVEL DEFINITION
This feature can increase the apparent number of programmable
keys by allowing you to program different levels into any cell. For every different level you program you must select another key to be a “SHIFT LEVEL” key. Programming is accomplished in the normal manner. After programming the base level a separator bar must be entered to separate the base level from the second level. You can program more than
two levels per cell. For example, if you needed to program small coffee, medium coffee, and large coffee into one cell follow the procedure outlined below:
1.Select a blank cell and enter the most common coffee first
(medium coffee). Mark the legend sheet for this cell COFFEE.
2.Enter the separator bar by depressing and holding the ALT key and pressing the letter S. A solid line will appear on the programming line immediately following the last character typed.
3.Enter the second level (small coffee) followed by another separator.
4.Enter the third level of information (large coffee). The entire programming line should look like the following:
F5
MEDIUM COFFEE
SMALL COFFEE
LARGE COFFEE
5.Select a blank location to (F11) become the first level shift position. Mark the legend sheet for this location SMALL.
6.Change the programming mode of this cell to
7.Select another blank location (F12). This will become the second level shift position (will activate the third level of information). Mark the legend sheet for this position LARGE.
12
