HARDWARE CONNECTIONS
The LK7000 can be connected to an IBM101 PC, XT, AT or clone
computer, PS/2 computer, or computer terminal. The following diagram shows how the keyboard connects to the computer and standard
keyboard or other keyboard peripheral (magnetic stripe reader, scanner, etc.).
To | To | Reserved |
Peripheral | Computer | for optional |
|
| MSR |
NOTE: Before making any connections it is always advisable to turn off the computer.
A.Connecting the LK7000 to an IBM101 PC, XT, AT, or clone computer’s keyboard port:
1.Use the computer interface cable. Plug the AT or PS/2 Male
connector plug into the compter. Connect the RJ11 connector into the “To Computer” connector on the LK7000.
2.Connect the keyboard interface cable to the standard keyboard. The
PS/2 Female connector plugs into the PS/2 connector on the rear panel of the LK7000. The RJ11 connector plugs into the “To Peripheral” connector on the back of the LK7000.
3
