. Replace the three screws that firmly attach the back cover to the logic board. Then, you are ready to reinstall the ‘rubberized’ back piece. This piece just snaps back in. Align the piece with the back of the remote and press firmly at the top. Move to the middle and press again. You should feel and hear very definite engagement. Press firmly along the sides and length of the piece to ensure that all tabs have been engaged. Then, inspect the edges. If it appears that a side tab did not fully engage, simply press the spot sideways and it should click right in. There should not be any spaces between this piece and the body of the remote.
8. Install the remaining four screws back in the bat- tery compartment and, if desired,
Do a final test to make sure everything works as expected. Feel free to contact me if you have any questions. I’m always happy to help.
Quin (HarmonyRemoteRepair on Ebay)
info@harmonyremoterepair.com
Page
