Using your Bluetooth headset with the Logitech wireless hub
3.(Windows® XP only.) Go to the Voice tab and check that ‘Bluetooth Audio’ is selected in both the Voice playback and Voice recording
4.Click OK to save any changes made and close the dialog.
•Exit and restart the program you are using to play sound.
•Check that the volume for your computer is not set to ‘Zero’ or ‘Mute’.
•Turn the headset off and back on. To do this:
1.Turn the headset off by pressing and holding the button on the side of the headset for up to 10 seconds until its indicator light flashes red.
2.Turn the headset back on by pressing and holding the button on the side of your headset for up to 10 seconds until its indicator light first flashes blue, and then flashes red and blue.
3.Repeat the connection procedure for your Logitech headset, see Connecting your Logitech headset, page 6.
•Make sure your headset is fully charged.
My headset is connected but I can’t chat using an instant messenger
If you can’t chat using an instant messenger, try the following:
•Carry out the suggestions in the previous section for My headset is paired and connected, but I can’t hear sound.
To stop and start the instant messenger, you must select Exit and then
restart the program. Signing out and back in does not stop and start the program properly.
•If you are using MSN® Messenger, try running the Audio Tuning Wizard again. See page 17 step 3 for details.
•If you are using Yahoo! ® Messenger, try running the Audio Setup Wizard again. See page 18 step 3 for details.
•If you are using Yahoo! ® Messenger and you receive a message saying that you are not authorized to join a conference, this may be because Yahoo! ® Messenger has timed out. To be able to join the conference click OK to close the message, then click Voice Off followed by Voice in the Voice Conference window.
© 2003 Logitech, Inc. | 23 |
