Lopi Freedom Bay Fireplace Insert owner manual Features & Specifications

6 Features & Specifications

Installation Options:

•Masonry Fireplace Insert

WARNING: Do not install this fireplace insert into a factory-built metal (Z.C.) fireplace.

Features:

•EPA Phase II Approved

•3.1 Cubic Foot Firebox Volume

•Single Operating Control

•Accepts Logs Up to 24" Long

•Steel Plate Construction (5/16" & 3/16")

•Heavy Duty Refractory Firebrick

•High-Tech Blower

Heating Specifications:

Approximate Maximum Heating Capacity (in square feet)*	1,200 to 2,250
Maximum BTU's per Hour (Cord Wood Calculation)	74,300
Overall Efficiency (Oregon Method)	70 %
Maximum Burn Time	Up to 12 Hours

*Heating capacity will vary depending on the home's floor plan, degree of insulation, and the outside temperature. It is also affected by the quality and moisture level of the fuel.

Dimensions:

Measure side clearances	6" Diameter Flue
from the side of the insert.

5-5/8" 29-1/4"

20-1/4"

Measure top clearances from

the top plate.

Weight = 470 Lbs.

21-3/4"

Electrical Line (may be attached to the opposite side)

43-3/4"	15-3/4"
Measure front clearances	4-3/4"
from the faceplate.	Fireplace Opening
	Faceplate

Figure 1

Emissions:

2.6 Grams Per Hour (EPA Phase II Approved) – Tests conducted by E.E.S.P.C.

© Travis Industries 100-01163 4041129