13
TIMER: The LED will be ON when the schedule recording is set (i.e. when
you set up the DVR to record automatically in SCHEDULE REC SET, see
THE MAIN MENU SETTINGS, page 19).
ALARM: LED will be ON when the ALARM or MOTION function is set to
ON.
When the ALARM or MOTION function is ON, the LED will blink as an
Alarm is being triggered.
HDD FULL: If the OVERWRITE menu is set up, the LED will not blink in
any case.
The LED blinks if the HDD has less than 1GB of storage space, and
remains ON when the HDD is FULL.
2. PAUSE BUTTON
Press this button to pause the video in playback.
3. PLAY BUTTON:
This button serves two functions:
a) start the video playback
b) this button serves as the ENTER key in Menu mode
4. REW BUTTON
Press this button to begin high-speed reverse playback during the playback.
5. STOP BUTTON
Press this button to stop the video in playback.
6. REMOTE CONTROL SENSOR
7. FF BUTTON
Press this button to begin high-speed forward playback during the playback.
8. REC BUTTON
Press this button to start manual recording.