19
6.1 THE MAIN MENU SETTINGS Enter the MENU screen by pressing the Setup button. Scroll through the 11
options by pressing the UP and DOWN buttons (i.e. ◄=left, ▲=up, ▼=down, or
►=right). To enter a sub-menu, press the Enter button (i.e. QUAD/ENTER)
where the highlighted scroll bar is located. To exit the Main Menu, scroll down to
the Exit option and press the Enter button.
Note: In sub-menu of the Main Menu, you can exit the Menu mode by selecting
Exit, or you can return to the Main Menu by selecting Return. The Menu is
exited automatically after 20 sec of inactivity.
1. TIME / DATE SET - This sub-menu allows you to change the Time and
Date displayed on the monitor, and also program the information you’d like to
appear in the On-Screen Display.
(i) DISPLAY : Selecting [Y] enables on screen display of the date & time.
Selecting [N] hides this information.
(iii) TIME : Change the time (24 hour clock)
(iv) DATE : Change the date.
(v) DATE FORMAT : There are three formats to display the date:
MM / DD / YYYY : for U.S.A.
YYYY / MM / DD : for Asian countries.
DD / MM / YYYY : for European countries.
2. SEQUENCE SET - This sub-menu allows you to select how long you’d
like each channel to appear on-screen before automatically switching to the next
channel in Sequence mode. The Dwell Time is 0-59 seconds selectable for each
of the 4 channels and for Quad mode.
NOTE Channels without a camera, a Video Loss, or a Dwell Time of zero will be
skipped in sequencing.
3. TITLE SET - This sub-menu allows you to change the title of each
camera location (up to 8 characters), or remove the titles from the on-screen
display.
(i) DISPLAY : Selecting [Y] will enable the camera titles to appear in the on-
screen display. Selecting [N] will remove all titles from appearing in the
on-screen display.
(ii) CH 1 - 4: Change the titles of each individual camera (Maximum 8 digits
possible).
4. ALARM SET - This sub-menu allows you to enable / disable the
camera’s PIR Alarm function by channel.