27
8 PLAYBACK OPTION When the PLAY button is pressed, one of the Playback Search menus will
appear.
The Playback menu that appears upon pressing PLAY depends on the Search
option that was last used.
For example, if the last Search option used was a Time Search, then pressing
PLAY will bring up the Playback Time Search. If the last Search option utilized
was a Last Record, then pressing play will simply play the most recent recording.
8.1 FAST REWIND AND FAST FORWARD
You can increase the speeds of Fast Forward and Fast Rewind on the DVR.
The FF/REW speed is controlled (from the front panel or remote control) by
pushing the >> (FF) or the << (REW) button during playback of data.
Example Pressing the PLAY but ton then pressing the FF/REW button also
shows the speed of FF/REW (from 1x to max. 16x) on the monitor
screen. Continuously press the FF/REW button to change the speed.
8.2 MULTIPLEXING FUNCTION IN PLAYBACK
The multiplexing function of the DVR allows you to switch between individual
channels during playback and watch each one in Full-Screen. Press the Channel
buttons to view the Full Screen.
9 THE MASTER & SLAVE HDD The Master HDD is a hard disk drive. The Master HDD is located inside the DVR
cabinet and is accessible from the front of the DVR. The Slave HDD backs up the
Master HDD by providing extra storage space.
NOTE Once you have connected a Slave HDD, it needs to be activated in the
HDD SLAVE option of the HDD / REC SET sub-menu.
NOTE HDD that you connect to the system must be cleared. When the Master
HDD becomes full during recording, the earliest recorded data from the
Master HDD is sent to the Slave HDD. Data is not lost because it gets
transferred to the Slave HDD. The most recent recordings are found on
the Master HDD.