Display Modes

Display Modes

Initial Loading Sequence

Connect the POWER cable located on the back of the Observation System. The unit will automatically power on.

The System will load the firmware

The System will perform a Hard Drive check.

The unit will initially load to a split screen view, displaying all 4 cameras (if available).

NOTE: If a new HARD DRIVE is detected, the system will prompt you to FORMAT the drive. If you do not choose to format the HARD DRIVE, the drive will not be detected by the system.

If you choose to FORMAT a drive in this way, the drive will no longer be readable by a regular PC without using the HARD DRIVE VIEWER software included on the CD provided with this unit.

General Display Overview

21

Page 21
Image 21
LOREX Technology L15LD400 instruction manual Display Modes, Initial Loading Sequence, General Display Overview