LOREX Technology SC21CD5444UQ-A80 manual Sequence SET

2.SEQUENCE SET - This submenu allows you to select how long you’d like each channel to appear on-screen before automatically switching to the next channel in Sequence mode. The Dwell Time is 0-59 seconds selectable for each of the 4 channels and for Quad mode.

NOTE : Channels without a camera, a Video Loss, or a Dwell Time of zero will be skipped in sequencing.

3.TITLE SET - This submenu allows you to change the title of each camera location (up to 8 characters), or remove the titles from the on-screen display.

(i)DISPLAY : Selecting [Y] will enable the camera titles to appear in the on-screen display. Selecting [N] will remove all titles from appearing in the on-screen display.

(ii)CH 1 - 4 : Change the titles of each individual camera.

	[SEQUENCE SET]
QUAD	: [03 SEC]
CH 1	: [03 SEC]
CH 2	: [03 SEC]
CH 3	: [03 SEC]
CH 4	: [03 SEC]
RETURN		: [	]
EXIT		: [	]
		[TITLE SET]
DISPLAY		: [Y]
CH 1	: [CAMERA01]
CH 2	: [	C2	]
CH 3	: [	C3	]
CH 4	: [	C4	]
RETURN		: [	]
EXIT		: [	]

4.ALARM SET - This submenu allows you to enable / disable the camera’s PIR Alarm function by channel. The PIR motion sensor is not included with the 3 observation cameras, but it is available as an accessory (model ACC1401).

Note: The dome camera does not have the PIR motion detection feature

(i)ALARM : Selecting [OFF] disables PIR motion detection from triggering any alarm. Selecting [OSD] will allow alarms to be triggered, and the letters “AL” will appear on the screen of the camera location where the alarm is taking place. A third option, [OSD+BUZZER] will both display “AL” and emit a buzzer sound in the event of an alarm.

(ii)CH 1-4 :Set the length of alarm time for each channel between 1~59 seconds. Additionally, you can select the Alarm Input. The default setting is OFF - to activate the Alarm on a camera, change the setting to N/O (Normally Open), N/C (Normally Close).

Note: Some alternative brand PIR motion sensors have a default setting of N.C (normally closed). In order to activate the alarm on such a PIR motion sensor, change the setting to N.C

5.MOTION SET - This submenu allows you to enable / disable the Pixel-based Motion Detection function by channel and set its Sensitivity level.

(i)MOTION : Selecting [OFF] disables the Pixel-based Motion Detection function. Selecting [OSD] will allow motion to trigger alarms, and the letters “MD” will appear on the screen of the camera location where the motion is taking place. A third option, [OSD+BUZZER] will display “MD” and emit a buzzer sound in the event that motion is detected.

(ii)CHANNEL : Select which channels will have the Pixel Motion Sensing feature activated. The Sensitivity level can be set to zero for a channel, which will disable the Motion Sensing ability for that channel.

-9-