![](/images/new-backgrounds/1318221/31822137x1.webp)
PAN / TILT ZOOM:
The monitor is equipped with a
Please refer to www.strategicvista.com for more information on the available accessories (sold separately).
The Pan/Tilt Zoom feature supports “Pelco D” protocol, and operates via the 6 Pin DIN connection on Channel 1. To access and operate the PTZ feature, follow these instructions:
1)Connect the compatible Pan/Tilt Zoom Dome camera to Channel 1;
2)Go to the SYSTEM submenu and set the PAN/TILT(CH1) option to “Y”
3)You will see a contracted screen with a blue border. Use the Arrow keys to move sideways, and ENTER, to select whether to MOVE, ZOOM, or FOCUS the camera. (note: Focusing is currently not available on the SG7380 camera).
4)Enter the Pan/Tilt Zoom mode by holding the PAN/TILT key on the monitor for 3 seconds, or press the Pan/Tilt button on the remote control;
5)If you have selected MOVE, you can use all four arrow keys to Pan and Tilt in all directions. If you selected ZOOM or FOCUS, use the ▲▼arrow keys to Zoom / Focus IN / OUT.
6)Select and press the ENTER key on the EXIT option to escape the Pan/Tilt mode. Note: The system automatically exits the Pan/Tilt mode after 20 seconds of inactivity.
Refer to the diagram below for an illustration of Pan/Tilt Zoom mode
[CH1 PAN/TILT MODE]
MOVE ZOOM FOCUS EXIT
Important Note: The dome camera that is included with this system, (model