Gas-Fired Vented
FLOOR FURNACE
P/N 74521 |
| INSTALLATION AND |
| ||
REV. 08/97 |
|
| |||
OPERATING INSTRUCTIONS |
| ||||
|
| ||||
|
| MODEL NUMBERS | R | ||
|
| MILLIVOLT CONTROL SYSTEM |
| ||
NATURAL GAS |
| 90N30A | 90N50A | 90N65A | 90N75A |
|
|
|
|
|
|
WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life.
-Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
-WHAT TO DO IF YOU SMELL GAS:
•Do not try to light any appliance.
•Do not touch any electrical switch; do not use any phone in your building.
•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.
•If you cannot reach your gas supplier, call the fire department.
-INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER, SERVICE AGENCY OR THE GAS SUPPLIER.
The coating selected to provide longer life to the heat exchanger may smoke slightly upon initial firing. Please provide adequate ventilation if this occurs.
WARNING: Operation of this furnace when not connected to a properly installed and maintained venting system can result in Carbon Monoxide (C.O.) poisoning and possible death. For your safety, this furnace and the venting system should be inspected at least annually by a qualified service person.
THIS UNIT IS NOT APPROVED FOR INSTALLATION IN MOBILE HOMES,
GREENHOUSES, OR ENVIRONMENTS INVOLVING DUSTY, WET, CORROSIVE, OR EXPLOSIVE CONDITIONS. SUCH CONDITIONS WILL INVALIDATE THE WARRANTY AND MAY CREATE UNSAFE CONDITIONS.
