MAINTENANCE INSTRUCTIONS
CAUTION: Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation.
For proper operation, Floor Furnace must be kept clean. At regular intervals turn control valve to off, let cool, remove register and clean dust and foreign material from jacket with vacuum cleaner.
Have the Floor Furnace checked by a qualified service technician for venting system, pilot, and burner operation prior to its use each year.
Follow a regular service and maintenance schedule for safe and efficient operation.
Keep flammable materials away from floor furnace area.
Be sure not to obstruct combustion and ventilation air.
TO CLEAN BURNER
1.Remove bottom pan from outer casing.
2.Remove 2 screws from burner support bracket.
3.Remove 2 screws from pilot bracket allowing burner to slide off of manifold and out of floor furnace.
4.Examine the burner. If any distortion is noticed, replace burner.
5.Clean burner ports by inserting a toothpick in ports to remove any debris that might have accumulated.
6.Inspect burner for spider webs or dust buildup during the
7.
WARNING
Do not use any kind of solvent or cleaning fluid to clean your floor furnace. It may leave a residue or invisible coating that will burn or smell when you turn your floor furnace on. Use only a damp cloth.
Repair service must be performed by qualified persons. The floor furnace must be inspected before initial use. An annual cleaning of floor furnace and safety performance check should be made by a qualified service person. More frequent cleaning may be required when exposed to the excessive lint conditions due to carpeting and bedding material, etc. It is imperative that the control compartment, burners, and circulating air passageways of the floor furnace be kept clean. Any safety screen or guard removed for servicing the floor furnace must be replaced prior to operating heater.
Examine the entire venting system as a routine part of the safety performance check on an annual basis.
WARNING
This is a
SERVICE RECORD
SERVICE RECORD
SERVICE RECORD
SERVICE RECORD
Page 14
