INSTALLING HEATER
WALL MOUNT (BFT10)
STEP 1. Remove wall mounting bracket from back of heater.
STEP 2. Locate wall stud.
STEP 3. Attach wall mounting bracket to wall stud with top at desired height, using (2) screws provided. Make sure top of bracket is level. See Figure 3.
STEP 4. Hang top of heater on wall mounting bracket. STEP 5. Remove bottom front panel.
STEP 6. Secure back of heater to wall, utilizing anchors (if necessary) or wood screws. See Figure 4.
WALL STUD
WALL
MOUNTING
BRACKET
FIGURE 3
HOLES FOR MOUNTING BACK OF
HEATER TO WALL
FIGURE 4
WALL MOUNT
BFT20 & BFT30
STEP 1. Remove wall mounting bracket from back of heater.
STEP 2. Locate two studs.
STEP 3. Attach wall mounting bracket to wall studs with top at desired height using (2) wood screws provided. Make sure top of bracket is level. See Figure 5.
STEP 4. Hang top of heater over wall mounting bracket. STEP 5. Remove bottom front panel.
STEP 6. Secure back of heater to wall, utilizing anchors (if necessary) or wood screws. See Figure 4.
Wall Mounting Bracket | Wall Stud |
|
FIGURE 5
INSTALLING VF-FSK FLOOR BASE KIT
STEP 1. Remove floor base from carton.
STEP 2. Align screw holes in base to holes in heater bottom.
STEP 3. Align
NOTE: Floor bases are for use on BFT10, BFT20 and BFT30.
HEATER
Make sure this
Page 9