Lowrance electronic LWX-1 installation instructions To use AR Mast Mount Installation

1. AR Mast Mount Installation

The LWX-1 AR is shipped in the retail box factory-configured for a mast mount.

NOTE: When installing, make sure the RJ45 will fit properly

through any ratchet mounts or other boat hardware.

To use AR Mast Mount Installation:

1.Loosen the four AR Bolts & Nuts (a couple of counter-clockwise turns on each).

2.The AR Mast Boot will loosen, allowing the AR Mast Mount to turn.

3.Insert the AR Interconnect Cable into the Antenna Mount and route it carefully to the Interface Module (IM). Planning the cable route in advance will avoid multiple cable pulls that could increase the likeli- hood of damaging the connector.

3