Manuals / Brands / Computer Equipment / Network Card / LSI / Computer Equipment / Network Card

LSI 20160 2.2.4 Connecting SCSI Peripherals, Figure 2.3 SCSI Cables

1 62

Download 62 pages, 425.07 Kb

2.2.4 Connecting SCSI Peripherals

All internal SCSI bus connections to the LSI20160 can be made with an unshielded, 68-conductor ribbon cable (see Figure 2.3). One side of this cable is marked with a color to indicate the pin-1 side. The connectors on this cable are keyed to ensure proper pin-1 connection. Some internal cables come with an LVD/SE terminator on one end. This end should be furthest from the host adapter.

All external SCSI bus connections to the LSI20160 are made with shielded, 68-conductor cables (see Figure 2.3). The connectors on this cable are always keyed to ensure proper pin-1 connection.

Figure 2.3 SCSI Cables

SCSI Cable for Internal Connections

68-pin

High Density

SCSI Cable for External Connections

68-pin

VHDCI

2-6	Installing the LSI20160

Copyright © 2001 by LSI Logic Corporation. All rights reserved.

Contents

USER’S GUIDE Electromagnetic Compatibility Notices Page Page Preface Related Publications Revision History Contents Appendix A Glossary of Terms and Abbreviations Customer Feedback Figures Page Tables Page Describing the LSI20160 1.1General Description 1.2 Features 1.2.1 PCI Interface 1.2.2 SCSI Interface 1.2.3 Board Characteristics 1.2.4SCSI Activity LED Interface 1.3 Ultra160 SCSI Beneﬁts 1.3.1 Double Transition (DT) Clocking 1.3.2 Cyclic Redundancy Check (CRC) 1.3.3 Asynchronous Information Protection (AIP) 1.4 SureLINK™ Ultra160 SCSI Domain Validation Beneﬁts 1.5 LVDlink™ Technology Beneﬁts 1.6 TolerANT® Technology Beneﬁts Installing the LSI20160 2.1Quick Installation Procedure 2.2 Detailed Installation Procedure 2.2.1 Before You Start 2.2.2 Selecting a PCI Slot 2.2.3 Inserting the Host Adapter Figure 2.2 Inserting the Host Adapter 2.2.4 Connecting SCSI Peripherals 2.2.4.1 Making Internal SCSI Bus Connections Figure 2.4 Internal SCSI Ribbon Cable to Host Adapter Figure 2.5 Internal SCSI Ribbon Cable to Internal SCSI Device Connection Figure 2.6 Connecting Additional Internal SCSI Devices Figure 2.7 Multiple Internal SCSI Devices Chained Together 2.2.4.2 Making Activity LED Connection Figure 2.8 SCSI LED Connector 2.2.4.3 Making External SCSI Bus Connections Figure 2.9 External Cable to Host Adapter Figure 2.10 External Cable to External SCSI Device Figure 2.11 Multiple External SCSI Devices Chained Together 2.2.5 SCSI Bus Termination 2.2.5.1 Internal SCSI Terminations Figure 2.12 Internal SCSI Device Termination 2.2.5.2 External SCSI Terminations Figure 2.13 External SCSI Device Termination 2.2.6 Setting SCSI IDs Table 2.1 SCSI ID Record 2.3 Completing the Installation Technical Speciﬁcations 3.1Physical Environment 3.1.1 Physical Characteristics 3.1.2Electrical Characteristics 3.1.3 Thermal, Atmospheric Characteristics 3.1.4Electromagnetic Compliance 3.1.5 Safety Characteristics 3.2 Operational Environment 3.2.1 The PCI Interface Table 3.2 PCI Connector J1 (Front)1 Table 3.3 PCI Connector J1 (Back)1 3.2.2 The SCSI Interface 3.2.3 The LED Interface 3.3 Subsystem ID and Subsystem Vendor ID Page Appendix A Glossary of Terms and Abbreviations Bus Mastering Byte CISPR Conﬁguration CRC Dword EEPROM EISA External SCSI Device IRQ ISA Kbyte Local Bus Logical Unit NVRAM Operating System Parity Checking Passive PC99 RAM RISC Core ROM SCAM SCSI SCRIPTS Processor SDMS Single-Ended STA SureLINK Ultra160 SCSI VCCI VDE VHDCI Virtual Memory Index Page Customer Feedback Reader’s Comments http://www.lsilogic.com/contacts/na_salesofﬁces.html