LSI AA1167-E1 manual Power Requirements, Unit/Component Requirements

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Power Requirements

Table 3 Power Requirements

Unit/Component			Requirements
	Domestic			International
AC Power	250 VAC, 30 A			230 VAC, 32 A
AC Plug	NEMA L6-30P, locking plug			IEC 309 locking plug
Receptacle	6-30R, receptacle			IEC 309 receptacle
Circuit Breaker			20 A
Voltage Range			180 to 257 VAC
Frequency			49 to 50.5 Hz or 59 to 60.6 Hz
Current			220 VAC, 50/60 Hz
(specified frequency)
		Configuration A1		Configuration B1	Configuration C1
Operational Current	LP Drives2		7.35 A	14.70 A	13.16 A
	HH Drives2		7.70 A	15.40 A	13.72 A
Surge Current	LP Drives		10.95 A	21.90 A	22.20 A
	HH Drives		11.45 A	22.90 A	23.00 A

1Power specifications for three configurations containing Low-Profile (LP) and Half-Height (HH) drives, including: Configuration A contains 1 command module and 5 drive modules

Configuration B contains 2 command modules and 10 drive modules Configuration C contains 3 command modules and 8 drive modules

2LP drives are 1.0 inch tall; HH drives are 1.6 inches tall.

10 72-Inch Cabinet Site Preparation and Installation Guide