6.2.5Step 5: Install MegaRAID SCSI 320-1

Select a 3.3 V or 5 V PCI slot and align the MegaRAID SCSI 320-1 controller bus connector with the slot. Figure 6.6 shows the differences between the 3.3 V and 5 V slots.

Figure 6.6 3.3 V and 5 V PCI Slots

Insert the MegaRAID SCSI 320-1 card in the PCI slot, as shown in Figure 6.7. Press down gently but firmly to make sure that the card is properly seated in the slot. The bottom edge of the controller card should be flush with the slot. Attach the bracket to the computer frame with the bracket screw.

6-12Hardware Installation

Copyright © 2002 by LSI Logic Corporation. All rights reserved.