LSI manual Hardware Connections for the SYM8953U Host Adapter

Figure 2.1 Hardware Connections for the SYM8953U Host Adapter

Internal

SCSI

Interface

J2

External

SCSI

Interface

J3

LED

Connector

J4

SYM8953U

J1 to PCI Mainboard

Step 7. Carefully insert edge connector J1 (see Figure 2.1) of the host adapter into the PCI slot.

Make sure the edge connector is properly aligned before pressing the board into place as shown in Figure 2.2. The bracket around connector J3 should fit where you removed the blank panel.

Note: You may notice that the components on a PCI host adapter face the opposite way from non-PCI adapter boards you have in your system. This orientation is correct. The board is keyed and will only go in one way.

Detailed Installation Procedure 2-5