LSI SYM8953U manual Making External Scsi Bus Connections, External Cable to Host Adapter

2.2.5 Making External SCSI Bus Connections

This section provides step-by-stepinstructions about making external SCSI bus connections. To connect external SCSI devices to the SYM8953U host adapter:

Step 1. Plug the 68-pin HD connector on one end of a shielded external SCSI cable (see Figure 2.3) into the host adapter connector J3 (see Figure 2.1).

This connector is in the bracket attached to the back panel of your computer. Figure 2.9 shows how this connection is made.

Figure 2.9 External Cable to Host Adapter

HD Connector

Detailed Installation Procedure 2-15