ENGLISH
5.OVEN DOOR REMOVAL
Convection Oven Door Removal Instructions
(To attach the door, reverse the directions,starting with Step 3)
Side of
Oven
|
| Step 2 | open flat) |
|
|
| |
|
| (side view) | Side of |
Side of |
| Rotate the Hinge Lock | Oven |
| |||
| to up position. |
| |
Oven |
|
| |
|
| Hinge Lock- must be in | Top |
|
| up/locked position) |
|
Bottom
Hook
Bottom 
Hook
Step 1
(side view)
Open the door fully.
Hinge lock - in “down/unlocked” position
Door (fully opened; does not
Step 3
(side view)
Top Hook Roller
Hinge Lock- in up/locked position)
) (2
Hinge Arm
(1)
1) Tilt door up at about 45o angle until the Top Hook on the Hinge Arm is lower than the Top Hook Roller,
2) then pull out of the Hinge Slots.
PLEASE NOTE: Hinge Locks may become jostled into the unlocked position by rough handling of the carton during shipping, causing the door to be unhinged from the oven when the carton is opened. If this occurs, follow the directions for attaching the door.
6.TROUBLESHOOTING
1
REMOVE/REPLACE BLACK CAP
2
PUSH THE RESET
BUTTON
ice on your oven.
Your
If your oven shuts down when you are oper- ating at high temperatures, the following steps will allow you to reset the breaker and resume safe operation.
- Unscrew the black reset knob safety cover |
at the rear of the oven next to the power |
cord. |
Work safely, disconnect the power and allow the oven to cool before performing any serv-
- Press the reset button to the “in” position. |
