Cadco OV-500, OV-400, OV-250, OV-600 instruction manual Cleaning and Maintenance

ENGLISH

3.4HUMIDITY FEATURE - ONLY on Models OV-500 and OV-600

Models OV-500 and OV-600 have a manual humidity injection feature. The humidity indicator light will illuminate when the humidity feature is being used. Pressing the sil- ver humidity button introduces a spritz of water to the cook- ing cavity creating a moist

cooking environment.

Warning!

To keep from damaging the motors, the humidity injection button should only be pressed for short [5-10 seconds] intermittent periods.

4.CLEANING AND MAINTENANCE

WARNING:

Work safely, disconnect the oven and allow it to cool before cleaning or maintenance.

4.1CLEANING

The oven is not to be cleaned with pressur- ized water. You could damage the electrical components and an unsafe condition could occur.

Clean the cooking chamber with soap and water. Never use harsh, caustic products or acids.

The rack system is cleaned by removing the retaining screws by the front of the cooking chamber. The racks can then be easily removed and washed.

4.2REPLACEMENT OF THE INTERNAL LAMP (Not

Available On All Models)

To replace the internal lamp do as follows:

-Disconnect the oven from the power supply and and let it cool.

-Take out the side rack supports.

-Unscrew the glass cover counterclockwise and replace the lamp with one with the same characteristics (240V-15W-300°C / 572°F).

-To reassemble, follow the reverse order.

ENGLISH 7