Step 2. Plug the 68-pin connector on the other end of the shielded external SCSI cable into the SCSI connector on your external SCSI device. An example of this connection is shown in Figure 2.10.

Figure 2.10 External SCSI Device Cable

HD Connectors

If this is the only external SCSI device on your system, proceed to Section 2.2.6, “SCSI Bus Termination,” page 2-18for termination instructions. If you have multiple SCSI devices, proceed to the next page.

2-16

Installing the SYM8953U Host Adapter

Page 32
Image 32
LSI SYM8953U manual External Scsi Device Cable