Chapter 2

Installing the

LSIU80ALVD

This chapter provides instructions on how to install the LSIU80ALVD and includes these topics:

•Section 2.1, “Quick Installation Procedure,” page 2-1

•Section 2.2, “Detailed Installation Procedure,” page 2-3

•Section 2.3, “Completing the Installation,” page 2-24

2.1Quick Installation Procedure

This section is provided for the experienced computer user with prior host adapter installation and SCSI bus setup experience. If you prefer a more detailed guidance for installing the LSIU80ALVD, follow the instructions in the Section 2.2, “Detailed Installation Procedure.”

For safe and proper installation, check the user’s manual supplied with your computer and perform the following steps.

Step 1. Ground yourself before removing this host adapter board. Remove the LSIU80ALVD from the packing and check that it is not damaged. An example of this host adapter board is shown in Figure 2.1.

Step 2. Switch off and unplug the system.

Step 3. Remove the cabinet cover on your computer to access the PCI slots.

Caution: Ground yourself by touching a metal surface before handling boards. Static charges on your body can damage electronic components. Handle plug-in boards by the edge; do not touch board components or gold connector contacts. The use of a static ground strap is recommended.

LSIU80ALVD PCI to Ultra2 SCSI Host Adapter

2-1